Steel Security Doors and Doorsets

Performance security.

Versatile capability.

Steel security rated doors are designed to withstand physical attack for varying periods of time, with a variety of attack tools. The longer the attack time, and the more aggressive the tools used, the higher the doors’ performance rating.

They do not look unusual at first glance, but they are there when things get tough. And they can even keep armed intruders out. Our security doors are thus suitable for all high-risk areas.

• Security rooms in airports and train stations
• Police stations
• Banks, financial institutions
• Court buildings
• Safe rooms
• Police sections at large venues
• Private buildings with high security requirements (including ballistic)

Teckentrup offers a complete design, manufacture and installation solution.

Teckentrup steel fire doors and doorsets have been tested to: 

• European Security Standard EN1627 achieving RC2, RC3 & RC4 ratings
• Exova Security Standard STS202 achieving BR1, BR2 & BR3 ratings 
• LPS 1175 Issue 7 Security Standard achieving SR1, SR2 & SR3 ratings 
• LPS 1175 Issue 8 Security Standard achieving A1 (SR1), B3 (SR2), C5 (SR3), D5 and D10 (SR4) ratings 
• LPS 2081 Stealth A & B ratings
• BS EN 1522 Bullet proof rating FB4
• BS EN 179 & BS EN 1125 Panic functions
• EN1634-1 achieving 120 minutes fire integrity and 60 minutes fire insulation
• European Standards EN1628 & 1629 for static and dynamic loading
• ISO12567-1 achieving a UD value of 1.1 W/m2/K°
• EN12207 for air permeability achieving Class 2/4* for a single and Class 1/3* for a double leaf door * Single point/Multi-point locking
• EN12208 for water tightness achieving Class 7A for a single and Class 6A for a double leaf door
• EN12210 for wind resistance achieving Class 3/5 for a single and Class 1/3 for a double leaf door
• A 62mm insulated door set, fitted with heavy duty ‘KO’ hinges has been tested to EN1191 for repeated opening and closing to C5 level – 200,000 cycles

What does security mean?

Without certified test evidence of performance, any claims for a doors’ security are unproven. 

Teckentrup 62 doors have been tested to all the widely recognised standards including the new LPS 1175 issue 8.

Teckentrup 62 can be configured to withstand physical attack for varying periods of time with a variety of attack tools. The longer the attack time and the more aggressive the tools used, the higher the security rating.

Are all standards the same?

No. Each standard has differences, however they address the same issues of tools and time, each in a slightly different way. 

Standards also address the type of attack - LPS 1175 categorises attacks regardless of the noise made, whilst LPS 2081 categorises attacks made with minimal noise, “stealth” attacks. BS EN 1627-1 categorises for stealth on RC2 & RC3 and RC4 regardless of noise.

LPS 1175 Issue 8

Teckentrup 62 has been tested to Issue 8 of the standard. The bracketed rating, e.g. (SR1) provides the equivalent under Issue 7 where applicable.

The commonly required security levels, along with the typical applications are shown below. The standard has more extended times and tool kits, however as, apart from highly specialised applications, LPS 1175 D10 (SR4) is generally the highest requirement and we’ve limited the listing up to this level.

Under the new LPS1175 Issue 8 standard, Teckentrup 62 provides the following range:

• Teckentrup 62 Secure 1 LPS 1175 A1 (SR1)
  Tool type A, 1 minute attack, max test duration 10 minutes
  Opportunist attack using small, easily concealed tools, typically used for domestic and low commercial risks. 
• Teckentrup 62 Secure 2 LPS 1175 B3 (SR2) 
  Tool type B, 3 minute attack, max test duration 15 minutes
  More determined opportunist attack using tools of greater mechanical advantage, typically used for domestic and low commercial risks such as office buildings, schools and small shops.
• Teckentrup 62 Secure 3 LPS 1175 C5 (SR3) 
  Tool type C, 5 minute attack, max test duration 20 minutes
  Deliberate forced entry using a wide selection of commonly available tools, typically used for higher commercial risks and infrastructure. 
• Teckentrup 62 Secure 3+ LPS 1175 D5 
  Tool type D, 5 minute attack, max test duration 20 minutes
  Experienced attempts at forced entry, typically used for higher commercial risks and infrastructure.
• Teckentrup 62 Secure 4 LPS 1175 D10 (SR4)
  Tool type D, 10 minute attack, max test duration 30 minutes
  Experienced attempts at forced entry, typically used for high commercial risks and critical infrastructure. 

• LPS 2081 “stealth”
  The test categorises opportunist attack using stealth and small, easily concealed tools (Type A) or tools with greater mechanical advantage, fairly easy to conceal about the person (Type B). Typically used for domestic and low commercial risks.
  Teckentrup 62 Secure A LPS 2081 A 
  Tool type A, 1 minute attack, max test duration 10 minutes 
  Teckentrup 62 Secure B LPS 2081 B
  Tool type B, 3 minute attack, max test duration 15 minutes

• BS EN 1522 FB4
  Armed attackers are also thwarted with Teckentrup 62 tested to FB4 resistance.

Also available with...